Description3 Axis Brushless Gimbal3 Axis Brushless Gimbal Description:Brushless gimbalFeatures:Color: black / silverAxis: 3 axis gyroFlight controller: Storm32Motor : 2 pcs 2204 260kv & 1 pc 2805 140kvBattery plug: JSTWeight: about 177.5±2 gCompatible camera: Gopro 4,3,2 ; SJ4000 , Xiaomi xiaoyi camera( not included)compatible frame : DJI Phantom 1 2 / Walkera X350Strom32 Gimbal Controller Features:board version: v1.4board color: bluemotor drivers in DFN packages: yeson-board MPU: yeson-board bluetooth module: noI2C plug type: picoblade (1.25mm JST)I2C#2 plug type: picoblade (1.25mm JST)pin headers: noIncluded accessories:1 complete Ready to use gimbalPoints to note:Firmware : 051The pins on connector I2C#2 are reversed as with respect to connector I2CALL boards HAVE the diode required for running a bluetooth module!!!SPECIFICATIONSsupply voltage: 6 – 18 V or 2 – 4Smotor current: max. 1.5 A per motorComment: This is not yet fully exploited, motors with resistances of 12 Ohm or larger have been tested to be well handled at 4S (see here, here), motors with 10 Ohm may be handled with care (see here andhere).board dimensions: 50 mm x 50 mm, 45 mm bolt to bolt, holes Ø3 mm
